Question 1. Common Source
Assume that all MOSFETs are in saturation, calculate the small-signal voltage gain of each circuit. (λ ≠ 0,γ = 0)
To have a better understanding of the quantified properties of
the common source circuit, he built a simple model and decided to do some precise calculations with it.
After careful considerations, he found out that his circuits perfectly satisfies the task.
Question 2. Common Source with Diode-connected Load (Lunatic)
Consider the following circuit with (W/L)1 = 50/0.5 and (W/L)2 = 10/0.5. Assume that λ = γ = 0. Then 3 V for VDD , 0.7 V for VTH1
1) At what input voltage is M1 at the edge of the triode region? What is the small-signal gain under this condition?
2) What input voltage drives M1 into the triode region by 50mV ? What is the small- signal gain under this condition?
However, the project requirements demanded more than just high gain.
The amplifier needed to handle high frequencies efficiently, which led Sam to explore the common gate amplifier, which has unique
properties of low input impedance and good high-frequency response. Sam spent late nights in the lab, tweaking and testing, until they
achieved a configuration that performed well at the required frequencies.
Question 3. Common Gate Common Source (Medium)
Find the intrinsic gain Av and output impedance Rout for the amplifier when I1 = 0.01 and 0.1mA respectively. (Neglect body effect)
Parameter for NMOS: VTHN = 0.7V , Kn = 110µA/V2 ,λ = 0.04V−1
Parameter for PMOS: VTHP = −0.7V , Kp = 50µA/V2 ,λ = 0.05V−1
All the size of transistor is W = 20µm, L = 1µm
The real test came when Sam decided to combine the strengths of both configurations into a cascode amplifier.
This was a complex task that required precise tuning and a deep understanding of both common source and common gate amplifiers.
Sam dove into research papers, consulted with colleagues, and ran numerous simulations. Each iteration of the design brought them
closer to the desired outcome. The lab became a second home, with Sam often working through weekends to perfect the design.