Hello, dear friend, you can consult us at any time if you have any questions, add WeChat: THEend8_
ENGR3821/9921 - Network Engineering
Workshop 7
Implement “Hidden Primary” domain name server,
with client facing secondary domain name servers
Project Background
• Evaluate the available Free, Libre and Open Source (FLOSS) Domain
name services for your Linux system in the Network Lab or Devuan/
Debian/Ubuntu/Kali VM on your BYOD
• A “hidden primary” name server is used to maintain dynamic updates
for clients that move around your network
• The “public secondary” name servers are the client facing servers that
process all the client domain name requests
• Install the domain name server software on your target VMs
• Setup a two domain name servers in a “primary/secondary” or “master/
slave” configuration, including access control lists (ACLs) limiting
access to the services by IP; one primary server, with one secondary
servers. Such that client machines can not access the “hidden” server.
• Enabled logging of client requests
• Test that these domain name servers are performing zone transfers on
zone updates, from primary to secondaries
• Depending on the software chosen, eg bind9, configuration typically is
stored in;
/etc/bind/*
• Test the client domain name requests from the secondary name server
VM
Page of - V 1.4, Copyright(C) 2020, Kim Hawtin1 3
Deliverable
The document should contain;
•Clearly document all of the steps required to add new domain name server to
your target machines/VMs
•Clearly document the steps to configure new DNS zone files
•Clearly document the steps used to test zone transfers on zone updates
•Provide as an appendix configuration files
•Provide as an appendix relevant snippets from log files to demonstrate zone
transfers
•Provide as an appendix relevant snippets from log files to demonstrate
fulfilling client requests
•Reference of all resources used and clearly mark quotations and citing
resources in your main body of work
There is no minimum or maximum page limits, as this document can vary
between the different technologies used. Include relevant detail on the install
process so that it can be used as a guide for yourself or others in the future.
Page of - V 1.4, Copyright(C) 2020, Kim Hawtin2 3
Layout Format:
Reports should be submitted in PDF Format ONLY. It must have standard
margins, single spacing, and no more than one line gap between paragraphs.
Arial/Helvetica fonts only, size 12 for the content. You should include your
name and student number on the TOP LEFT HAND Side only. Please name all
files with your FAN.
For appendices of log files containing wide lines, please use a suitable smaller
fixed width font.
Should be of the format;
FAN_WORKSHOP-06.pdf
Turnitin:
Turnitin is now expected to be used for all assignments across the university.
More information and links to Turnitin here on the Topic front page.
Ensure you have used Turnitin before submitting your final review.
Failure to do so will see your assignment grade rejected.
Turnitin may take as many as 24 hours to process once your assignment has
been submitted. If your assignment has been submitted before the deadline,
Turnitin processing will not add time to your submission.
Assessment:
This assignment is worth 10% of your overall grade.
If you have any queries, please contact your lecture or tutor at once using
the One to One communication on the topic page in FLO, or via Slack.
Page of - V 1.4, Copyright(C) 2020, Kim Hawtin3 3