Hello, dear friend, you can consult us at any time if you have any questions, add WeChat: THEend8_
Subject – ISYS90081
Final Exam – X NOV 202X
Answer 1:
EXAMPLE OF GOOD ANSWER (worth 8 points) – Discursive format
Given that the bank hired me to review its existing process architecture and update it, the first thing I
would do is to request access to the latest version of the process architecture. Process architectures
require to be updated when one or more processes change, new processes are added, or old processes
are deprecated. Consequently, I would ask for support from the bank managers or process participants
to identify those processes likely to have changed from the last updated of the process architecture.
Once identified those processes, I would get in touch with the (current or past) process owners to
understand what changed and if those processes are still executed or if they are now deprecated. Given
that the whole project would focus on the process identification phase, I would validate each process
mentioned in the existing process architecture. Once the existing process architecture is validated, e.g.
by removing deprecated processes, I would focus on identifying possible new processes that are not
documented in the existing process architecture. This investigation could be done by asking information
to managers and customer service teams, to understand whether the bank has new internal processes
and/or provides new services or products to customers. Then, I would add all the new processes to the
updated process architecture. When that is completed, I would identify the relations among the
processes, such as horizontal relations to determine value-chains, and vertical relations, to draft the
vertical scoping, which I would hand over with the final process architecture. Given the scope of the
project, it is unlikely that the bank would request the process profile of each of their processes or the
prioritized process portfolio, because the bank is not interested (at the moment) to proceed with other
phases of the BPM lifecycle. So I would complete the project by just handing over the reviewed and up
to date process architecture.
EXAMPLE OF GOOD ANSWER (worth 8 points) – Bullet points format
1. I would request access to the latest available version of the process architecture. I assume there is
one because the bank hired me to review and update the existing process architecture, and not to
create it from scratch.
2. I would identify the processes in the existing process architecture that have changed or have been
removed. To do this, I would require the support of some employees. For example, I could ask for
the support of the process governance officer, which I assume to be present in a large bank with
an existing process architecture. Alternatively, I could ask for the support of managers or even
process participants if necessary.
3. Once identified the processes mentioned at point b., I would remove from the existing process
architecture those that are not executed anymore. Then I would get in touch with the current or
past process owners of the processes that have changed over time, to understand whether they
are still core processes and therefore should remain in the process architecture or if they are now
subprocesses or support processes.
2
4. Completed point c. the existing process architecture should be updated by adding any new process.
To do this, I would ask information to either managers and/or customer service team, to identify
new internal processes (e.g. management or support processes) or new processes that deliver
services and products to customers.
5. Lastly, I would focus on identifying value-chains (analysing how the processes succeed each other)
and producing the vertical scopes. I would not instead produce process profiles and prioritised
portfolio because they are clearly not requested by the bank, and they are artifact mostly valuable
as input for the successive phases of the BPM lifecycle.
EXAMPLE OF BAD ANSWER (worth 2 points) – Bullet points format
1. I get the existing process architecture
2. I check what processes are still in use
3. I remove the processes that are not used anymore
4. I add the new processes
Answer 2:
EXAMPLE OF GOOD ANSWER (worth 7 points) – Bullet points format
1. As cycle time efficiency = processing time / cycle time, a low cycle time efficiency means that
only a small amount of time is taken up by activities and there is a large amount of waiting time.
2. Firstly, I would perform Waste analysis to identify the sources of the large amount of waiting
time.
3. According to Waste analysis, there are 7 types of waste, and they are:
a. Transportation
b. Motion
c. Inventory
d. Waiting
e. Defects
f. Over-processing
g. Over-production
4. I would go through each activity in the process and identify any of the 7 types of waste, but I
would have a special focus on Waiting waste, because I assume it to be the major cause of the
low cycle time efficiency and therefore I would like to remove it.
5. There can be two kinds of Waiting waste. They are Task waiting for resources (task idleness)
and Resource waiting for work (resource idleness). I would check each activity and resource to
identify both kinds of Waiting waste in the process.
6. Once I have identified all the Waiting waste in the process, I would report it in a list together
with their amount of waiting.
7. Lastly, I would perform root-cause analysis to identify the causes of the Waiting waste, by
starting with the Waiting waste that has the largest amount of waiting time.
8. Why-why diagram or Cause-effect diagram could be used for root-cause analysis. I would use
Why-why diagram for root-cause analysis. I would arrange to meet with the concerned process
participants. In the meeting, I would explain the purpose of the meeting to them and then
repeatedly ask them why questions to better understand why the identified waiting is
happening in the process.
3
EXAMPLE OF BAD ANSWER (worth 2 points) – Bullet points format
1. I assume that there is a large amount of waiting.
2. I would perform Waste analysis to identify the waiting.
3. I would also identify non-value adding activities in the process.
4. Lastly, I would ask why-questions to identify the causes.
Answer 3:
To familiarise with this exam format, please try to write answer 3 by yourself, then send it to
[email protected] or the discussion forum for feedback.