Hello, dear friend, you can consult us at any time if you have any questions, add WeChat: THEend8_
MCO455 FINAL PROJECT
This project will NOT be submitted, but there may be questions relating to this project on LAB TEST 2.
Descriptions: This burglar alarm system will use the BLUEFRUIT App to
control the inputs to the burglar alarm system using the
CONTROL PAD feature.
Button 1 - Turns on the Burglar Alarm
LCD Turns on and shows initial Screen
saying “ARM ALARM 2”
“ALARM OFF 4”
on GREEN background
Button 2 - LCD says “ALARM is ARMING “
“Please Leave now”
on RED BACKGROUND
Arms the Alarm system by showing count down
on 4 digit display till 0 then clears
4 -digit display and puts message
“ ALARM ARMED “
“ Motion Sensing”
message on LCD on Green background
When Motion is detected, then ALARM MESSAGE
“ Intruder “
“ DETECTED “
is displayed on the LCD flashing between WHITE and RED
4 or 5 times
After this is will display the message
“ Alarm Sounding “
“3 Disable ALarm “
in a PURPLE/MAROON colour
Button 3 - Will Disable the alarm.
Then it will say
“ ALARM DISARMED “ on a green background
“2- ARM, 4- OFF” on the LCD
on a Green background
and then clear 4-digit display
Button 4 - Will put up 2 second message saying
“ ALARM IS about “
“ to Turn OFF “
in a PURPLE/MAROON colour and
then turn off the LCD after the 2 seconds are up.
Click on THIS LINK to access the .BIN file that you can download to see how this program should
interact with the user. Then REVERSE ENGINEER your code to do the same thing.